ULTRA HIGH PURITY
NANO PURFICATION PART: NDL-020 5 SCFM
3/8″ IN/OUT CONNECTIONS MOUNT ON FLOOR OR WALL
Wet air from the compressor after-cooler enters the dryer and is directed into column A. Bulk liquids (water) and particles are removed by the filtration/separation stage, which is located on the inlet to the cartridge. Water is retained within the dryer until the column is regenerated, when it will be vented to atmosphere as it is depressurised. Following the filtration stage, air passes through the desiccant bed where any remaining moisture is adsorbed. Finally, the dry air passes through a particle filter, which retains any remaining desiccant particles that may have been carried through the system (<1 micron / ISO8573.1 class 2 for dust).
Simultaneously, a small amount of dry air is counter-flowed down through cartridge B and exhausted to atmosphere, removing the moisture and regenerating the desiccant.
The dryer is controlled by a PLC which periodically switches the solenoid valves when the compressor is running, reversing the function of each column and therefore ensuring the continuous supply of dry air.
Patented combined filter & desiccant cartridges
• Water separation, inlet and outlet filtration and desiccant are all integrated into a single cartridge (eliminates up to 3 external filters and drains).
• Built in inlet filter improves flow distribution and lowers pressure drop.
• Snow storm filled desiccant provides maximum adsorption capacity.
• Easy to replace cartridges simplify maintenance requirements.
The advanced nano D-Series1 dryers use the pressure swing adsorption principle to efficiently dry compressed air. They use a heatless twin tower configuration (see diagram opposite) housed in a modular design. Each column contains a unique (and patented) desiccant cartridge which incorporates inlet and outlet filtration.
We carry motors, compressor parts, rebuilding/tune-up kits
for all major brands of air compressors.
If you don’t see what you are looking for, simply contact us with your brand/model.
Have questions? Give us a call!